Skip to content
Tweco Fabricator 252I MIG, TIG, Stick Welder Pkg. with Cart (W1004402)
The Tweco Fabricator 3-in-1 252i Welding System (W1004402) features MIG, Stick, and TIG welding capabilities; all in a portable package. Weighing in at only 66 lbs, this integrated platform has automatic input voltage selection from 208-230 VAC and an operating range of 187 - 276 VAC.
MIG:
• Infinite Voltage Control with optimized starting performance.
• Inductance Control for arc stability and spatter control.
• Tweco MIG Gun w/15 ft. cable and industry standard Tweco #4 connection.
• Durable Metal Feed Plate features 2 roll drive system, quick change reversible drive rolls and easy-to-set single scaled wire tension knob.
• 4", 8", or 12" Spool capacity allows easy installation of wire spool sizes.
• Spool Gun ready
STICK:
• Adjustable Arc Force Control for optimum STICK electrode performance.
• Excellent 6010 welding electrode performance.
TIG:
• Lift TIG Start: Provides TIG arc starting without use of high frequency.
Other Features:
• PFC Power Factor Correction: Up to 40% more electrically efficient than conventional MIG Welders.
• Digital Meters: Voltage and Amperage; Preview and Hold capability.
• Excellent Portability: Lightweight, less than 66 lbs.
• Comprehensive Setup Chart: Weld set up guide for optimum welding performance over a wide range of materials and shielding gases.
• Trigger Control: 4T (Latch) eliminates operator fatigue.
• Remote Receptacle: Enables connection of remote control devices and Spool Gun.
• Quick Change Polarity: Simple quick change polarity (no tools required) from the front of the power source.
• Overload Protection: Shuts down the power source to protect the internal electrical components from overheating.
• IP23S: Suitable for outdoor use.
• Advanced Features: Includes Pre & Post Flow, Down Slope, Hot Start, Spot, Stitch, Burn Back, Wire Sharp, Arc Hour
Includes:
• Fabricator 252i Power Supply
• Tweco WeldSkill 200 Amp Ground Clamp with 10 ft (3 m) Lead
• Victor EDGE Argon Flow Gauge
• Tweco WeldSkill 200 Amp Electrode
• Outlet Guide, .023" (0.6mm)
• 15 ft (4.6 m) Tweco Fusion 250 Amp MIG Gun
• Gas Hose, 12.5 ft (3.8 m), Male 5/8-18
• 9 ft (2.7 m) Power Cord and NEMA 6-50P 230V AC Plug
• Operator’s Manual
• Single Cylinder Professional Cart
• Holder with 13 ft (4 m) Lead
Drive Rolls:
• .035" / .045" V Groove Lower & Flat Upper (Fitted)
• .023" / .030" / .035" V Groove
• .045" Flux Cored Roll
Contact Tips (1 each):
• .030 (0.8 mm), .035 (0.9 mm), .045 (1.2 mm)
MIG:
• Infinite Voltage Control with optimized starting performance.
• Inductance Control for arc stability and spatter control.
• Tweco MIG Gun w/15 ft. cable and industry standard Tweco #4 connection.
• Durable Metal Feed Plate features 2 roll drive system, quick change reversible drive rolls and easy-to-set single scaled wire tension knob.
• 4", 8", or 12" Spool capacity allows easy installation of wire spool sizes.
• Spool Gun ready
STICK:
• Adjustable Arc Force Control for optimum STICK electrode performance.
• Excellent 6010 welding electrode performance.
TIG:
• Lift TIG Start: Provides TIG arc starting without use of high frequency.
Other Features:
• PFC Power Factor Correction: Up to 40% more electrically efficient than conventional MIG Welders.
• Digital Meters: Voltage and Amperage; Preview and Hold capability.
• Excellent Portability: Lightweight, less than 66 lbs.
• Comprehensive Setup Chart: Weld set up guide for optimum welding performance over a wide range of materials and shielding gases.
• Trigger Control: 4T (Latch) eliminates operator fatigue.
• Remote Receptacle: Enables connection of remote control devices and Spool Gun.
• Quick Change Polarity: Simple quick change polarity (no tools required) from the front of the power source.
• Overload Protection: Shuts down the power source to protect the internal electrical components from overheating.
• IP23S: Suitable for outdoor use.
• Advanced Features: Includes Pre & Post Flow, Down Slope, Hot Start, Spot, Stitch, Burn Back, Wire Sharp, Arc Hour
Includes:
• Fabricator 252i Power Supply
• Tweco WeldSkill 200 Amp Ground Clamp with 10 ft (3 m) Lead
• Victor EDGE Argon Flow Gauge
• Tweco WeldSkill 200 Amp Electrode
• Outlet Guide, .023" (0.6mm)
• 15 ft (4.6 m) Tweco Fusion 250 Amp MIG Gun
• Gas Hose, 12.5 ft (3.8 m), Male 5/8-18
• 9 ft (2.7 m) Power Cord and NEMA 6-50P 230V AC Plug
• Operator’s Manual
• Single Cylinder Professional Cart
• Holder with 13 ft (4 m) Lead
Drive Rolls:
• .035" / .045" V Groove Lower & Flat Upper (Fitted)
• .023" / .030" / .035" V Groove
• .045" Flux Cored Roll
Contact Tips (1 each):
• .030 (0.8 mm), .035 (0.9 mm), .045 (1.2 mm)
| MPN: | THAW1004402 |
|---|---|
| UPC: | 822635021393 |
MPN: THAW1004402
UPC: 822635021393
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
MIG
What is the Best Miller MIG Welder to Buy?
When looking through the catalog of Miller’s MIG machines, it might feel a bit overwhelming trying to pick the perfect machine for you. With so many great welders, how can you really choose? Many f...
MIG
How to Dial In Your Millermatic 252 Settings
Dialing in your welding settings can often feel like shooting at a target with a blindfold on while riding a merry-go-round. There are a million ways to miss, and you won’t always know how far off ...
MIG
How to MIG Weld Aluminum With the Millermatic 252
As one of the best workhorses of the Millermatic line, the Millermatic 252 is more than capable of welding aluminum. However, to get good results, you definitely need to know the right way to appro...