Miller SuitCase X-Treme 12VS with Bernard Dura-Flux Gun and Meters (951544)
Download Product Spec Sheet
The 951544 12VS is no longer available. The suggested replacement is the 951731 12VS ArcReach Feeder.
You guessed it, the Miller SuitCase X-Treme 12VS with Bernard Dura-Flux Gun and Meters includes a Bernard Dura-Flux gun.
Features
• X-Treme 12VS provides wire feed speed that is accurate and consistent from the start of the weld to the finish, and from one weld to the next.
• Consistent wire feed speed is very important with large-diameter cored wire, because small changes in wire feed speed make large changes in deposition rates.
• New, wire delivery system bends wire over a large radius and applies just the right amount of force to ensure consistent feeding.
• Polypropylene case with built-in slide rails and the ability to open the door to change wire with feeder in vertical position.
• Dura-Flux gun - 350-amp, 60% duty cycle, air-cooled, 15 ft cable
• Potted and trayed main printed circuit board for the harshest environments adds exceptional reliability. Board has full-trigger isolation so a shorted gun trigger will not affect feeder operation.
• Improved contactor for high-amperage, high duty cycle applications (8VS: 330 A at 60%).
• Trigger hold, wire jog, and gas purge are all located on front panel
• Wider voltage range for small and large wires with no contactor chatter or arc outages.
• Double-filtered gas valve helps keep dirt from clogging and affecting gas flow.
• Excellent starts and improved superior arc performance for all types and sizes of wires whether using CV or CC power supply.
• Digital meters with SunVision technology can display voltage and wire speed, and also amperage if desired. Meters can be seen clearly even in direct sunlight.
• Weight - 35 lbs
Includes
• 12VS Feeder (300876)
• 15' Bernard Flux-core gun (FLX3515AM)
• Drive Rolls - .068/.072-5/64 V Knurled (301092)
You guessed it, the Miller SuitCase X-Treme 12VS with Bernard Dura-Flux Gun and Meters includes a Bernard Dura-Flux gun.
Features
• X-Treme 12VS provides wire feed speed that is accurate and consistent from the start of the weld to the finish, and from one weld to the next.
• Consistent wire feed speed is very important with large-diameter cored wire, because small changes in wire feed speed make large changes in deposition rates.
• New, wire delivery system bends wire over a large radius and applies just the right amount of force to ensure consistent feeding.
• Polypropylene case with built-in slide rails and the ability to open the door to change wire with feeder in vertical position.
• Dura-Flux gun - 350-amp, 60% duty cycle, air-cooled, 15 ft cable
• Potted and trayed main printed circuit board for the harshest environments adds exceptional reliability. Board has full-trigger isolation so a shorted gun trigger will not affect feeder operation.
• Improved contactor for high-amperage, high duty cycle applications (8VS: 330 A at 60%).
• Trigger hold, wire jog, and gas purge are all located on front panel
• Wider voltage range for small and large wires with no contactor chatter or arc outages.
• Double-filtered gas valve helps keep dirt from clogging and affecting gas flow.
• Excellent starts and improved superior arc performance for all types and sizes of wires whether using CV or CC power supply.
• Digital meters with SunVision technology can display voltage and wire speed, and also amperage if desired. Meters can be seen clearly even in direct sunlight.
• Weight - 35 lbs
Includes
• 12VS Feeder (300876)
• 15' Bernard Flux-core gun (FLX3515AM)
• Drive Rolls - .068/.072-5/64 V Knurled (301092)
| MPN: | MIL951544 |
|---|---|
| UPC: | 715959588591 |
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
Engine-Driven Welders
Can Your Truck Fit an Engine-Driven Welder?
Having a mobile welding solution can be a huge opportunity. Not being held down by the power grid allows you to take jobs anywhere. Is there a 250-volt socket at the job? Doesn’t matter, you’ve got...
Helmets
How Auto Darkening Welding Helmets Work
The amount of misinformation there is about auto darkening helmets is staggering considering how simple they are to use. This article is here to set the record straight, explaining exactly how mode...
MIG
A Complete Review of Miller’s PipeWorx 400
Sometimes, you can just tell a product was made by someone who didn’t actually think about using the item. The infamous example is scissors that come in a package that requires scissors to open.
Mi...