Skip to content
Miller Multimatic 200 Multiprocess Welder (907518)
Download Product Spec Sheet
Miller has discontinued the Multimatic 200. The suggested replacement is the Multimatic 215 (907693 / 951674).
The Miller Millermatic 200 is the only all-in-one, portable, multiprocess power source from Miller is our most versatile machine to date. Weighing only 29 pounds and running on either 120 or 230 V, the Multimatic 200 can go anywhere.
Auto-Set Elite
Auto-Set Elite can be used on multiple materials and multiple processes with the ability to fine-tune your settings. Simple to set up and use!
Excellent arc characteristics!
Multimatic 200 offers positive arc starts and an extremely stable arc with minimal spatter on both mixed gases and straight CO2.
Simple Aluminum Solution
Spoolmate 100 direct-connect spool gun offers a reliable and economical solution for welding aluminum up to 1/4 inch with 4043 aluminum wire.
Fan-On-Demand
Miller's Fan-On-Demand technology operates only when needed reducing noise, power consumption and the amount of airborne contaminants pulled through the machine.
Ultimate Durability
The Multimatic 200's impact-resistant case provides strength and durability, protecting the internal components and welding wire.
Plugs in Anywhere!
Multi-voltage plug (MVP) allows you to connect to common 120 or 230 V power receptacles without the use of any tools—choose the plug that fits the receptacle and connect it to the power cord.
Miller's Auto-Line Technology
Provides state-of-the-art flexibility, automatically connecting to 115 or 230 VAC, single-phase power without removing the cover to re-link the power source. See how it works.
Comes complete with:
• Multimatic 200 power source
• Power cord and MVP plugs for 120 and 230 V
• 10-ft. (3 m) Miller MDX 250 MIG gun (Accepts Miller MDX Consumables)
• 13-ft. (4 m) lead with electrode holder and 25-mm Dinse connector
• 10-ft. (3 m) work lead with clamp and 25-mm Dinse connector
• Two contact tips for .030-in. (0.8 mm) wire, and two contact tips for .035-in. (0.9 mm) wire
• Dual-groove quick-change drive rolls for .024-in. (0.6 mm) or .030/.035-in. (0.8/0.9 mm) wire
• Smith Argon and AR/CO2 mix regulator/flow gauge with 12-ft. (3.7 m) hose
• Setup and operation DVD
• Information/settings chart and quick setup guide
• Material thickness gauge
The Miller Millermatic 200 is the only all-in-one, portable, multiprocess power source from Miller is our most versatile machine to date. Weighing only 29 pounds and running on either 120 or 230 V, the Multimatic 200 can go anywhere.
Auto-Set Elite
Auto-Set Elite can be used on multiple materials and multiple processes with the ability to fine-tune your settings. Simple to set up and use!
Excellent arc characteristics!
Multimatic 200 offers positive arc starts and an extremely stable arc with minimal spatter on both mixed gases and straight CO2.
Simple Aluminum Solution
Spoolmate 100 direct-connect spool gun offers a reliable and economical solution for welding aluminum up to 1/4 inch with 4043 aluminum wire.
Fan-On-Demand
Miller's Fan-On-Demand technology operates only when needed reducing noise, power consumption and the amount of airborne contaminants pulled through the machine.
Ultimate Durability
The Multimatic 200's impact-resistant case provides strength and durability, protecting the internal components and welding wire.
Plugs in Anywhere!
Multi-voltage plug (MVP) allows you to connect to common 120 or 230 V power receptacles without the use of any tools—choose the plug that fits the receptacle and connect it to the power cord.
Miller's Auto-Line Technology
Provides state-of-the-art flexibility, automatically connecting to 115 or 230 VAC, single-phase power without removing the cover to re-link the power source. See how it works.
Comes complete with:
• Multimatic 200 power source
• Power cord and MVP plugs for 120 and 230 V
• 10-ft. (3 m) Miller MDX 250 MIG gun (Accepts Miller MDX Consumables)
• 13-ft. (4 m) lead with electrode holder and 25-mm Dinse connector
• 10-ft. (3 m) work lead with clamp and 25-mm Dinse connector
• Two contact tips for .030-in. (0.8 mm) wire, and two contact tips for .035-in. (0.9 mm) wire
• Dual-groove quick-change drive rolls for .024-in. (0.6 mm) or .030/.035-in. (0.8/0.9 mm) wire
• Smith Argon and AR/CO2 mix regulator/flow gauge with 12-ft. (3.7 m) hose
• Setup and operation DVD
• Information/settings chart and quick setup guide
• Material thickness gauge
| MPN: | MIL907518 |
|---|---|
| UPC: | 715959563727 |
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
MIG
How to MIG Weld Aluminum With the Millermatic 252
As one of the best workhorses of the Millermatic line, the Millermatic 252 is more than capable of welding aluminum. However, to get good results, you definitely need to know the right way to appro...
MIG
Millermatic 252: Why It’s a Top Choice for Professional Welders
The Millermatic 252 is the workhorse of Miller’s lineup. It’s tough, simple and incredibly powerful. In fact, it has the highest power output in its class at 250 amps at 28 VDC. This makes it capab...
MIG
Where Is the Millermatic 211 Made?
As one of the most beloved MIG machines ever created, the Millermatic 211 has made itself a lasting legacy within the welding community ― so much so that many people often wonder about the history ...