Skip to content
Miller Maxstar 200 DX TIG Welder and Water-Cooled Package with Fingertip Control (951138)
When the job demands greater control, pick the Miller MaxStar 200 DX TIG Welder with Fingertip Control and Water-Cooled Contractor Kit. The 200 DX provides pulse on/off, pulse frequency, a higher duty cycle, background amps, initial amps, initial slope time, final slope time, and final amperage control.
Wireless Remote Control Compatible
Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions.
Lift-Arc
Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.
Stick Features (DC)
Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
Hot Start
Adaptive control provides positive arc starts without sticking.
Low OCV Stick
Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
Blue Lightning High Frequency Arc Starter
For more consistent non-contact starts and greater reliability compared to traditional HF arc starters.
Auto-Line Power Management Technology
Allows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
DC TIG Features
DC TIG provides exceptionally smooth and precise arc for welding exotic materials.
Comes complete with:
• Maxstar 200 DX power source
• 8 ft (2.4 m) primary cord
• 2-Wheel trolley cart (300480)
• Coolmate 1 cooler 120 VAC (300360)
• 1 Gallon coolant (043810)
• RCCS-14 Finger tip control (043688)
• 25 ft (7.6 m) Weldcraft WP20 water cooled torch (300185)
• 15 ft (4.6 m) Work lead with clamp and Dinse connector
• Gas hose
• Smith Regulator/flowmeter
• Torch cable cover
• Setup DVD
• Adjustable shoulder strap
Torch accessory kit with tungsten includes:
• Shielding cups
• Collets-1/16, 3/32, 1/8
• Collet bodies-1/16, 3/32, 1/8
• 2% Cerium tungsten-1/16, 3/32, 1/8
Wireless Remote Control Compatible
Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions.
Lift-Arc
Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.
Stick Features (DC)
Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
Hot Start
Adaptive control provides positive arc starts without sticking.
Low OCV Stick
Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
Blue Lightning High Frequency Arc Starter
For more consistent non-contact starts and greater reliability compared to traditional HF arc starters.
Auto-Line Power Management Technology
Allows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
DC TIG Features
DC TIG provides exceptionally smooth and precise arc for welding exotic materials.
Comes complete with:
• Maxstar 200 DX power source
• 8 ft (2.4 m) primary cord
• 2-Wheel trolley cart (300480)
• Coolmate 1 cooler 120 VAC (300360)
• 1 Gallon coolant (043810)
• RCCS-14 Finger tip control (043688)
• 25 ft (7.6 m) Weldcraft WP20 water cooled torch (300185)
• 15 ft (4.6 m) Work lead with clamp and Dinse connector
• Gas hose
• Smith Regulator/flowmeter
• Torch cable cover
• Setup DVD
• Adjustable shoulder strap
Torch accessory kit with tungsten includes:
• Shielding cups
• Collets-1/16, 3/32, 1/8
• Collet bodies-1/16, 3/32, 1/8
• 2% Cerium tungsten-1/16, 3/32, 1/8
| MPN: | MIL951138 |
|---|---|
| UPC: | 715959416962 |
MPN: MIL951138
UPC: 715959416962
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
MIG
What is the Best Miller MIG Welder to Buy?
When looking through the catalog of Miller’s MIG machines, it might feel a bit overwhelming trying to pick the perfect machine for you. With so many great welders, how can you really choose? Many f...
MIG
How to Dial In Your Millermatic 252 Settings
Dialing in your welding settings can often feel like shooting at a target with a blindfold on while riding a merry-go-round. There are a million ways to miss, and you won’t always know how far off ...
MIG
How to MIG Weld Aluminum With the Millermatic 252
As one of the best workhorses of the Millermatic line, the Millermatic 252 is more than capable of welding aluminum. However, to get good results, you definitely need to know the right way to appro...