Skip to content
Miller Dynasty 200 DX TIG Welder and Water-Cooled Package with Fingertip Control (951140)
This package is no longer available from Miller. The suggested replacement pkg is the Dynasty 210 DX Complete (951668)
The Miller Dynasty 200 DX TIG Welder and Water-Cooled Contractor Kit with Fingertip Control offers pulse on/off, pulse frequency, peak duty cycle, background amperage, initial amperage, initial slope time, final slope time and final amperage control.
Wireless Remote Control Compatible
Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions.
Lift-Arc
Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.
Blue Lightning - High Frequency Arc Starter
For TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity.
Auto-Line Power Management Technology
Allows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable.
AC Waveforms
• Advance Squarewave provides a fast freezing puddle, deep penetration, and fast travel speeds.
• Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action.
• Sine wave is for customers that like a traditional arc. It is quiet with good wetting.
• Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds.
AC and DC TIG Features
• Extended AC balance (30-99%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.
• AC frequency (20-250 hz) controls the width of the arc cone and the force of the arc.
• DC TIG provides exceptionally smooth and precise arc for welding exotic materials.
Stick Features (AC/DC)
• Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
• Hot Start adaptive control provides positive arc starts without sticking.
• AC frequency control adds additional stability when Stick welding in AC for smoother welds.
• Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
Torch accessory kit with tungsten includes:
• Shielding cups
• Collets-1/16, 3/32, 1/8
• Collet bodies-1/16, 3/32, 1/8
• 2% Cerium tungsten-1/16, 3/32, 1/8
Comes complete with:
• Dynasty 200 DX power source
• Quick Reference Guide: English | Spanish
• 8 ft (2.4 m) primary cord
• 2-Wheel trolley cart (300480)
• Coolmate 1 cooler 115 V (300360)
• 1 Gallon coolant (043810)
• RCCS-14 Finger tip control (043688)
• 25 ft (7.6 m) Weldcraft WP20 water cooled torch (300185)
• 15 ft (4.6 m) Work lead with clamp and Dinse connector
• Gas hose
• Smith Regulator/flowmeter
• Torch cable cover
• Setup DVD
• Adjustable shoulder strap
The Miller Dynasty 200 DX TIG Welder and Water-Cooled Contractor Kit with Fingertip Control offers pulse on/off, pulse frequency, peak duty cycle, background amperage, initial amperage, initial slope time, final slope time and final amperage control.
Wireless Remote Control Compatible
Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions.
Lift-Arc
Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.
Blue Lightning - High Frequency Arc Starter
For TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity.
Auto-Line Power Management Technology
Allows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable.
AC Waveforms
• Advance Squarewave provides a fast freezing puddle, deep penetration, and fast travel speeds.
• Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action.
• Sine wave is for customers that like a traditional arc. It is quiet with good wetting.
• Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds.
AC and DC TIG Features
• Extended AC balance (30-99%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.
• AC frequency (20-250 hz) controls the width of the arc cone and the force of the arc.
• DC TIG provides exceptionally smooth and precise arc for welding exotic materials.
Stick Features (AC/DC)
• Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
• Hot Start adaptive control provides positive arc starts without sticking.
• AC frequency control adds additional stability when Stick welding in AC for smoother welds.
• Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
Torch accessory kit with tungsten includes:
• Shielding cups
• Collets-1/16, 3/32, 1/8
• Collet bodies-1/16, 3/32, 1/8
• 2% Cerium tungsten-1/16, 3/32, 1/8
Comes complete with:
• Dynasty 200 DX power source
• Quick Reference Guide: English | Spanish
• 8 ft (2.4 m) primary cord
• 2-Wheel trolley cart (300480)
• Coolmate 1 cooler 115 V (300360)
• 1 Gallon coolant (043810)
• RCCS-14 Finger tip control (043688)
• 25 ft (7.6 m) Weldcraft WP20 water cooled torch (300185)
• 15 ft (4.6 m) Work lead with clamp and Dinse connector
• Gas hose
• Smith Regulator/flowmeter
• Torch cable cover
• Setup DVD
• Adjustable shoulder strap
| MPN: | MIL951140 |
|---|---|
| UPC: | 715959416986 |
MPN: MIL951140
UPC: 715959416986
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
MIG
How to Dial In Your Millermatic 252 Settings
Dialing in your welding settings can often feel like shooting at a target with a blindfold on while riding a merry-go-round. There are a million ways to miss, and you won’t always know how far off ...
MIG
How to MIG Weld Aluminum With the Millermatic 252
As one of the best workhorses of the Millermatic line, the Millermatic 252 is more than capable of welding aluminum. However, to get good results, you definitely need to know the right way to appro...
MIG
Millermatic 252: Why It’s a Top Choice for Professional Welders
The Millermatic 252 is the workhorse of Miller’s lineup. It’s tough, simple and incredibly powerful. In fact, it has the highest power output in its class at 250 amps at 28 VDC. This makes it capab...