Miller Big Blue 400 Pro Mitsubishi Welder/Generator (907733)
Download Product Spec Sheet
The Miller Big Blue 400 Pro series diesel welder generators offer 10,000 continuous watts and 400 amp welding output.
Features
• Digital Meters with SunVision Technology
• Simple-to-set Controls
• Industrial USB Port
• Adjustable Hot Start
• Automatic Engine Idle
• 120V Block Heater
• Low OCV Stick
• Thermal Overload Protection
• Standard 14-Pin Receptacle
• HD Powder Coat resists Rust and Corrosion
Quick Specs
• Processes: Stick, MIG, Flux-Cored, DC TIG, Air Carbon Arc
• Output: DC Stick 20-400A | DC TIG 20-400A | FCAW/MIG 14-40V
• Generator Output: 12,000W Peak | 10,000W Continuous
• Sound Level: 68.7 dB @ Idle | 72.1 dB @ Weld
• Dimensions: 32" H x 26.25" W x 56" L
• Weight: 993 lbs
Features
• Digital Meters with SunVision Technology
• Simple-to-set Controls
• Industrial USB Port
• Adjustable Hot Start
• Automatic Engine Idle
• 120V Block Heater
• Low OCV Stick
• Thermal Overload Protection
• Standard 14-Pin Receptacle
• HD Powder Coat resists Rust and Corrosion
Quick Specs
• Processes: Stick, MIG, Flux-Cored, DC TIG, Air Carbon Arc
• Output: DC Stick 20-400A | DC TIG 20-400A | FCAW/MIG 14-40V
• Generator Output: 12,000W Peak | 10,000W Continuous
• Sound Level: 68.7 dB @ Idle | 72.1 dB @ Weld
• Dimensions: 32" H x 26.25" W x 56" L
• Weight: 993 lbs
| MPN: | MIL907733 |
|---|---|
| UPC: | 715959649513 |
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
MIG
A Complete Review of Miller’s PipeWorx 400
Sometimes, you can just tell a product was made by someone who didn’t actually think about using the item. The infamous example is scissors that come in a package that requires scissors to open.
Mi...
Guide
The Welding Hazards No One Talks About
Howard had been welding for more than a decade. But tonight, he was at home, watching a movie with his wife on the couch. In the movie, a background character picked up a welding torch and struck a...
cutting
The Right Way to Start Your Plasma Cuts
“Plasma cutting” and “good plasma cutting” are two entirely different things. “Plasma cutting” is almost as simple as not pointing the nozzle at your face and pulling the trigger. But plasma cuttin...