Hobart Maxal 4943 .035 X 1 Lb (4") Spool (494303504)
Hobart Maxal 4943 is similar to 4043 but provides 50% higher yield strength and 25% higher tensile strength. The general applications for this wire can be found in radiators and air conditioning components, automotive and motorcycle frames, aerospace hardware, ladders and frames, and ship decks. As with 4043, the Maxal 4943 will be used with 100% Argon shielding gas and lays down roughly 14-24 inches per minute.
Features and Benefits
• 50% Higher Yield Strength
• 25% Higher Tensile Strength
• Low Melting Temperature/High Fluidity
• Low Welding Smut and Discoloration
• Low Ductility
• Post Weld Fully Heat Treatable
• Excellent Corrosion Resistance
• Low Shrinkage Rate
• Low Hot Cracking Sensitivity
Features and Benefits
• 50% Higher Yield Strength
• 25% Higher Tensile Strength
• Low Melting Temperature/High Fluidity
• Low Welding Smut and Discoloration
• Low Ductility
• Post Weld Fully Heat Treatable
• Excellent Corrosion Resistance
• Low Shrinkage Rate
• Low Hot Cracking Sensitivity
| MPN: | HOB494303504 (Maxal 4943) |
|---|---|
| UPC: | 783507605557 |
MPN: HOB494303504 (Maxal 4943)
UPC: 783507605557
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
MIG
A Complete Review of Miller’s PipeWorx 400
Sometimes, you can just tell a product was made by someone who didn’t actually think about using the item. The infamous example is scissors that come in a package that requires scissors to open.
Mi...
Guide
The Welding Hazards No One Talks About
Howard had been welding for more than a decade. But tonight, he was at home, watching a movie with his wife on the couch. In the movie, a background character picked up a welding torch and struck a...
cutting
The Right Way to Start Your Plasma Cuts
“Plasma cutting” and “good plasma cutting” are two entirely different things. “Plasma cutting” is almost as simple as not pointing the nozzle at your face and pulling the trigger. But plasma cuttin...