MTCR8/TL-10

Crown Alloy 1/16 x 36" CROWN 8 - 10# Steel (ER 80S-D2) TIG 10 lb BOX (MTCR8/TL-10)

$135.00

Quantity:
Earn
Rewards points when you’re a Rewards member. Sign up or Login here
warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Crown 8 (ER 80S-D2) is a premium low-alloy cut length TIG filler metal that contains ½ percent molybdenum (for increased strength) and high levels of manganese and silicon to provide good wetting and good rust and scale tolerance. The higher level of deoxidizers (Mn and Si) help to control porosity. Crown 8 (ER 80S-D2) will yield radiographic quality welds with excellent bead appearance in both ordinary and difficult-to-weld carbon and low alloy steels. Crown 8 is THE recommended TIG alloy for welding 4130 tubing up to .120" wall thickness. The combination of weld soundness and strength makes the Crown 8 suitable for single and multiple-pass welding of a variety of carbon and low-alloy, higher strength steels in both the as welded and postweld heat-treated conditions. Maximum mechanical properties are achieved when using a preheat and interpass temperature of 275OF minimum.

From The Blog

miller’s pipeworx 400
MIG

A Complete Review of Miller’s PipeWorx 400

Sometimes, you can just tell a product was made by someone who didn’t actually think about using the item. The infamous example is scissors that come in a package that requires scissors to open. Mi...
welding hazards
Guide

The Welding Hazards No One Talks About

Howard had been welding for more than a decade. But tonight, he was at home, watching a movie with his wife on the couch. In the movie, a background character picked up a welding torch and struck a...
plasma cuts
cutting

The Right Way to Start Your Plasma Cuts

“Plasma cutting” and “good plasma cutting” are two entirely different things. “Plasma cutting” is almost as simple as not pointing the nozzle at your face and pulling the trigger. But plasma cuttin...