Skip to content
Crown Alloy 1/16 x 2# E 316LT-1FCo Flux-Cored Stainless Steel MIG 2 lb SPOOL (SS316L1/1L)
Crown E316LT-1 FCo is an all-position gas-shielded flux cored stainless steel electrode for flux cored arc welding (FCAW). The E316LT-1 FCo will produce high quality weldments in all positions of welding. It is used for welding type 316 and 316L stainless. It is also used to weld CF-8M and CF-3M stainless castings. The addition of molybdenum provides much greater corrosion resistance to sulphuric and sulphurous acids, chlorides and cellulose solutions than the 308 stainless. Both deposition rate and efficiency are better than that of covered stainless steel electrodes. Compared to the solid GMAW (MIG) process, Crown E316LT-1 FCo achieves all-position capability without using a pulsed power source or short circuit transfer. The E316LT-1 FCo will attain a higher deposition rate and better weld quality than GMAW (MIG) welding with solid wire. The weld deposits exhibit superior radiographic quality.
Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both the manufacturer and Welding Supplies from IOC recommends that you read and understand the Material Safety Data Sheets and product warning statements prior to using this product.
Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both the manufacturer and Welding Supplies from IOC recommends that you read and understand the Material Safety Data Sheets and product warning statements prior to using this product.
| MPN: | SS316L1/1L |
|---|---|
| UPC: | 412300631515 |
MPN: SS316L1/1L
UPC: 412300631515
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
MIG
How to Dial In Your Millermatic 252 Settings
Dialing in your welding settings can often feel like shooting at a target with a blindfold on while riding a merry-go-round. There are a million ways to miss, and you won’t always know how far off ...
MIG
How to MIG Weld Aluminum With the Millermatic 252
As one of the best workhorses of the Millermatic line, the Millermatic 252 is more than capable of welding aluminum. However, to get good results, you definitely need to know the right way to appro...
MIG
Millermatic 252: Why It’s a Top Choice for Professional Welders
The Millermatic 252 is the workhorse of Miller’s lineup. It’s tough, simple and incredibly powerful. In fact, it has the highest power output in its class at 250 amps at 28 VDC. This makes it capab...